Sale 15%

เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS2.6ii

เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS2.6ii เป็นเครื่องขยายเสียงจาก EV ในตระกุล CPS-Series มีกำลังขับ 2 x 600 วัตต์/4 Ohms 2 x 380 วัตต์/8 Ohms 2 x 900วัตต์/2 Ohms Class-AB design Switchable 50 Hz high-pass filter Remote power-on/off contact

43,000฿

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

[ กรุณาโทรสอบถามสต๊อกสินค้าก่อนทำการสั่งซื้อ ]

สั่งซื้อผ่านไลน์ @siamsoundstore
หมวดหมู่: , ป้ายกำกับ: Brand: Electro Voice

รายละเอียดเพิ่มเติม

เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS2.6ii

เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS2.6ii เป็นเครื่องขยายเสียงจาก EV ในตระกุล CPS-Series มีกำลังขับ 2 x 600 วัตต์/4 Ohms 2 x 380 วัตต์/8 Ohms 2 x 900วัตต์/2 Ohms Class-AB design Switchable 50 Hz high-pass filter Remote power-on/off contact

เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS2.6ii Designed for the contractor the CPS 2.6 MK II feature 2-RU chassis Phoenix-type connectors for inputs and outputs pre-programmable power-on delay easy power-on via remote contact closures rear panel attenuators and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers the CPS 2.6 MK II also includes a module slot for the RCM-810 remote-control module enabling networking features for system diagnostics and control via IRIS-Net software.

The power drawn from the mains network is converted into output power to feed the connected loudspeaker systems and into heat. The difference between power consumption and dispensed power is called power dissipation (Pd). The amount of heat resulting from power dissipation might remain inside of a rack-shelf and needs to be diverted using appropriate measures. The tables on page 31 allow the determination of power supply and cabling requirements. The tables are meant as auxiliary means for calculating temperatures inside of a rack-shelf system/cabinet and the ventilation efforts necessary. The column Pd lists the leakage power in relation to different operational states. The column BTU/hr lists the dispensed heat amount per hour. Power consumption is direct proportional for other mains voltages. The following conversion factors are meant for easy conversion: 100V = 2.3; 120V = 1.9; 240V = 0.96

Features

  • Up to 2 x 900 W into 2 ohms
  • Phoenix-type input and output connections
  • Remote power-on/off contact
  • Rear-mounted attenuators
  • Programmable time for custom power-on delay settings
  • Module slot for optional RCM-810 card allowing <a href=”http://irisnet.electrovoice.com/”>IRIS-Net</a> control and monitoring
  • Switchable 50 Hz high-pass filter
  • Three-stage front-to-rear fans
  • Class-AB design
  • Complete protection package

ดูสินค้า EV Electro-Voice ทุกรุ่น

ดูสินค้าเพาเวอร์แอมป์ทุกรุ่น

สเปคสินค้า

Specifications

Amplifier Gain 32 dB
Analog Inputs 2 electronically balanced Phoenix-type
Audio Network No
CAN Bus Interface Optional (RCM-810 card)
Continuous Rated Power (1 kHz THD 1%) 2Ω 900 Watts
Continuous Rated Power (1 kHz THD 1%) 4Ω 600 Watts
Continuous Rated Power (1 kHz THD 1%) 8Ω 380 Watts
Continuous Rated Power (20-20 kHz THD<02%) 4Ω 500 Watts
Continuous Rated Power (20-20 kHz THD<02%) 8Ω 250 Watts
Cooling Front-to-Rear 3-stage fans
Crossover Type Optional Modules
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 10 Hz – 40 kHz ±1 dB
Impedance 2/4/8 Ω
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 3.1 dBu (1.11Vrms)
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 240 V 230 V 120 V or 100 V; 50 Hz – 60 Hz (factory configured)
Maximum Bridged Output 4Ω 1800 Watts
Maximum Bridged Output 8Ω 1200 Watts
Maximum Input Voltage 21 dBu 8.69 Vrms
Network Control (IRIS-Net) Optional
Slew Rate 26 V/µs
Topology Class-AB
Total Harmonic Distortion 0.03 %
Variable Load Drive (VLD) No
Height 2RU 88.1 mm (3.47″)
Width 482.6 mm (19″)
Depth 421.5 mm (16.59″)
Weight Net 14.8 kg (32.63 lbs)

ดาวน์โหลด

↓EV CPS 2.6ii Power Amplifier MANUAL

Login

X