รายละเอียดเพิ่มเติม
เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS4.5 Amplifier
เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS4.5 Amplifier เครื่องขยายเสียง EV CPS 4.5 เป็นเครื่องขยายเสียงจาก EV ในตระกุล CPS-Series มีกำลังขับ 4 x 500 วัตต์/4 Ohms 4 x 500 วัตต์/8 Ohms 4 x 500วัตต์/2 Ohms. High Efficient Class-D Design Switchable 50 Hz high-pass filter (Hi-Z mode)
เพาเวอร์แอมป์ ยี่ห้อ EV Electro-Voice รุ่น CPS4.5 Amplifier The Electro-Voice CPS4.5 amplifier offers four independent Class-D Variable Load Drive (VLD) amplifier blocks each one capable of delivering up to 500 Watts into Low-Z or High-Z loads.
Per default each channel can be configured individually for max. power output into either 2 Ohms 4 Ohms 70V- or 100V- networks without involvement of any output transformers. Being designed for professional audio installation market special care was taken for long term cost of ownership parameters: In addition to remarkably low current consumption and heat dissipation the CPS4.5 provides remote standby switching with just 5 Watts consumption in standby mode.
An optional remote control module RCM-810 provides control and supervision features via IRIS-Net including monitoring of amplifier status and real time load supervision. In addition via RCM-810 the Variable Load Drive characteristics can be set for max. power output into any load between 2 Ohms and 10 Ohms in steps of 0.1 Ohm.
The power drawn from the mains network is converted into output power to feed the connected loudspeaker systems and into heat. The difference between power consumption and dispensed power is called power dissipation (Pd).
Features
- Four channels in one compact rack-efficient unit
- 500 W per channel
- 70/100 V operation for distributed systems
- Class-D design for optimum efficiency
- Slot for optional RCM-810 module allowing IRIS-Net control and monitoring
- IRIS-Net selection of each channel’s impedance (2-10 Ω in 0.1 Ω steps)
- Rear-mounted attenuators
- Switchable 50 Hz high-pass filter (Hi-Z mode)
- Complete protection: thermal overload shorts HF DC back-EMF inrush current
- Phoenix-type input and output connections
- Remote power-on/off contact
- Programmable power-on delay settings
- Front-to-rear fans
